ROWAN TELMAC ltd

Specialists in Bus Seating

The Rowan Telmac Bus Seat Range

Telford 15 Telford 15 Child Bus Seat

The Telford 15 child bus seat is a comfortable bus seat which has been designed and produced especially for children and the narrow seat width enables a three and two seat configuration to be fitted in the bus.

The colours of the grab handles and back seats can be mixed as shown to provide comfort with fun.

The Telford 15 child bus seats are fitted with full recessed backs which give more space for little legs and squab foam improves passenger comfort with its ergonomic contours.

A range of built in and rear six seats are produced to match.

Options

  • Headrest
  • Hip restraint armrest
  • Single seat
  • Lap belts
Telford 20 Urban Seat Telford 20 Urban Bus Seat

The Telford 20 is a tough luxury bus seat which has been designed to provide years of service. Style and comfort are combined with the strength of a quality steel frame to give durability (even when used on the most demanding of urban bus routes). This is another  "Fit and Forget" seat from the comprehensive Rowan Telmac range of bus seats.

The distinctive and stylish grab handles are made from moulded PU, and have an internal wire frame to provide strength with a comfortable feel. The grab handle can be supplied in almost any colour to match the vehicle trim and a standard down pole clamp   can be fitted either vertically or at 12 degrees

The Telford 20 bus seat comes with moulded ABS back panels which are available in most standard colours, with the option of standard or through backs (as shown above).

Strong stylish wavy pedestals and body side brackets are manufactured and polyester powder coated in house to suit customer and vehicle requirements.

As with all of the Telford range of bus seats; the trim can be removed in seconds to reduce maintenance time, enabling the vehicle to be operational for longer periods.

A range of built in and rear five seats are also produced to match the Telford 20 contours.

Options

  • Moulded anti vandal mesh cushions and squabs
  • Hip restraint armrest
  • Single seat
  • Two & One seat
  • Cantilever 
Telford 25 Telford 25 Headrest Seat

The Rowan Telmac Telford 25 headrest seat raises passenger comfort still further and provides style and comfort combined with the strength of a steel frame to provide durability, even when used on the most demanding urban bus routes. In fact; this is another "Fit and Forget" seat from the comprehensive Rowan Telmac range of bus seats.

The side grab handle is made from moulded PU and has an internal wire frame to provide comfort with strength. The grab handle can be moulded in almost any colour to match the vehicle trim and a standard down pole clamp can be mounted vertically.

the Telford 25 head rest seat comes with moulded ABS back panels, which are available in most standard colours with the option of a through or standard back

Strong stylish wavy pedestals and body side brackets are manufactured and polyester powder coated in house to suit customer and vehicle requirements.

As with all of the Telford range of bus seats; the trim can be removed in seconds to reduce maintenance time, enabling the vehicle to be operational for longer periods.

A range of built in and rear five seats are also produced to match the Telford 25 contours.

Options

  • Moulded anti vandal mesh cushions & squabs
  • Hip restraint armrest
  • Single seat
  • Lap belts
Telford 30  Telford 30 Round Headrest Seat

The Telford 30 round headrest bus seat provides increased passenger comfort. Its elegant lines, generous proportions and the strength  of a quality steel frame give durability even when used on the most demanding urban bus route. After all; it is from the   Rowan Telmac  "Fit and Forget" range of bus seats.

The distinctive rounded headrest has an integral grab handle made from moulded PU and has an internal steel frame to provide strength and comfort. The grab handle can be supplied in almost any colour to match the vehicle trim and a standard down pole clamp can be mounted.

The Telford 30 rounded head rest bus seat comes with moulded ABS back panels, which are available in most standard colours with the option of a through or standard back (as shown above).

Strong stylish wavy pedestals and body side brackets are manufactured and polyester powder coated in house to suit customer and vehicle requirements.

As with all of the Telford range of bus seats; the trim can be removed in seconds to reduce maintenance time, enabling the vehicle to be operational for longer periods.

A range of built in and rear five seats are also produced to match the Telford 30 contours.

Options

  • Moulded anti vandal mesh cushions and squabs
  • Hip restraint armrest
  • Single seat
  • Lap belts
Telford 40 Telford 40 Seatbelt Seat

The Telford 40 seat belt bus seat has been developed exclusively for seat belt use. These quality bus seats comes fitted with three point retractable seat belts and comfortable moulded foam headrests which are trimmed to match the seat. The seat belt retractor reel is tamper proof and totally concealed within the body of the seat.

The Telford 40 uses the proven Telford 20 steel frame which gives durability even when used on the most demanding urban bus route, because of course; it is from the Rowan Telmac "Fit and Forget" range of bus seats.

The side grab handle on the Telford 40 is made from moulded PU and has an internal wire frame to give strength and comfort. The grab handle can be moulded in almost any colour to match the vehicle trim and a standard down pole can be mounted vertically.

The Telford 40 comes with the new diamond moulded ABS back panels, which are available in most standard colours. Strong stylish wavy pedestals and body side brackets are manufactured and polyester powder coated in house to suit customer and vehicle requirements.

As with all of the Telford range of bus seats; the trim can be removed in seconds to reduce maintenance time, enabling the vehicle to be operational for longer periods.

A range of built in and rear five seats are also produced to match the Telford 40 contours.

Options

  • Moulded anti vandal mesh cushions and squabs
  • Hip restraint armrest
  • Single seat
  • Self adjusting belt
Telford 80 Tip-up Seat Telford 80 Standard Tip-up Seat

The Telford 80 standard tip up/folding seat has been designed to meet DDA requirements. The seat cushion automatically returns to the stowed position when released. This increases space for wheel chair access etc.

This seat has been specifically designed to be fitted inward, forward or rear facing as a single, pairs or triples.

Fixing points on the Telford 80 standard tip up/folding seat are positioned to suit the customers own vehicle requirements.

Naturally; as with all Rowan Telmac seats; it is from the "Fit and Forget" range.

Options

  • Customers Logo formed into cushion panel moulding
  • Moulded anti vandal mesh cushions & squabs
Telford 90 Telford 90 Highback Tip-up Seat

The Telford 90 high back wheelchair tip up / folding seat has been designed to meet DDA requirements. The seat cushion automatically returns to the stowed position when released. This increases space for wheel chair access etc. The seat has an extra high padded backrest which is specially designed for the comfort and safety of wheel chair users.

The strength of a quality steel frame gives durability, even when used on the most demanding of urban bus routes.

The Telford 90 high back wheelchair tip up / folding seat is available with a moulded back panel supplied in most standard colours.

Seat Body side fixing points on the Telford 90 are positioned to suit the customers own vehicle requirements.

As with all Rowan Telmac seats; it is from the "Fit and Forget" range.

Options

  • Moulded anti vandal mesh cushions & squabs
<-- Request a Brochure -->